Individually Addressable LED Strip Light for Flexible Lighting

The ALITOVE WS2812B LED strip features a high-performance 5050 RGB LED with a built-in WS2812B driver IC. It boasts 60 LEDs per meter, or 300 LEDs per 16.4-foot (5-meter) roll, with wavelengths of 620-625nm for red, 515-525nm for green, and 465-475nm for blue. The LEDs offer 24-bit full-color and 256 grayscale levels, powered by a DC 5V supply at 0.2W per LED, 12W per meter, and 60W per roll.

This waterproof IP67-rated LED strip features dimensions of (L)5000mm * (W)12mm * (H)4mm, or 16.4ft/5m per roll. The high scanning frequency of up to 2kHz/s and data transmission speed of up to 800kbps ensure smooth and responsive performance. The RGB order is GRB (not RGB), so be sure to set up the controller accordingly before use.

The flexible, black FPCB substrate allows the strip to be gently bent and curved around surfaces. Each LED is an independent circuit cell, enabling easy cutting and welding at the designated cutting lines to meet your specific requirements. The strips can be daisy-chained using the 3-pin JST connectors on both ends, eliminating the need for soldering.

Silicone waterproof sheathing provides IP67 protection, making the LED strip suitable for outdoor use. The product includes a male 3-pin JST connector, 5 silicone clips, and 10 mini screws for secure installation.

ALITOVE's WS2812B LED strip boasts superior components, including 9 pure gold wires, a copper bracket, and a better flexible FPCB with double-sided 35μm copper, double-sided film coating, and a larger 0805 capacitance. This ensures brighter illumination and enhanced durability.

The LED strip also features built-in protection features, such as reverse connection protection, overcurrent protection for each 50cm section, and hot-swap protection, ensuring safe and reliable operation.

The ALITOVE WS2812B LED strip is a versatile lighting solution suitable for a wide range of applications, including building outlines, DIY light projects, home improvement, and decorative lighting for nightclubs, hotels, and event venues. It can be controlled using various platforms, such as Arduino, FastLED, Raspberry Pi, Fadecandy, and pre-programmed WS2811 controllers.

Recommended power supplies include the ALITOVE 5V 10A, 15A, or 20A models, depending on the total power requirements of the LED strip. For optimal performance, it is advised to inject power every 5 meters when connecting the strips in series to mitigate voltage drop.

product information: